Epson EH-LS100 Laser LCD Projector Review

read Here


The Epson EH-LS100 is fairly straightforward to set up, all you need is a flat surface to position the projector on and a white wall or screen on which to project the image. The adjustable feet allow you to ensure that the projector is level, even if the surface its standing on isn’t. Then all you need to do is ensure that the projector is straight on with the wall or screen and move it backwards or forwards to get the screen size you require. You can get an image between 70 and 130 inches if you ensure that the projection window is between 41 and 78 centimetres from the wall or screen. Once you have done that there is a focus control on the right hand side behind the panel that covers the replaceable air filters. You simply pull up a test pattern from the menu and then move the control up and down until the image is in focus. It is possible to simply use a wall for projection as long as it’s matte white and suitably flat but for the best results we would recommend using a decent screen, either fixed or pull down.”






  1. Leave a comment

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: