SVS PB-4000 Subwoofer Review

Read Here

 

You can turn the low pass filter on or off depending on whether you’re using the sub with a Low Frequency Effect (LFE) channel. If the low pass filter is on then you can set the frequency at which the sub crosses over with the main speakers and you can adjust the slope at which the low pass filter rolls off (the default is 12dB). There’s also a Phase control, which allows you to shift the timing of the subwoofer output to align with the main speakers or additional subwoofers, and a Polarity control that allows you to reverse the electrical polarity from positive (default) to negative if necessary. The Room Gain Compensation control allows you to adjust for excessive sound wave density in smaller rooms by reducing the bass at either -6 or -12 dB per an octave, below a frequency that is adjustable from 25 to 40 Hz. You do this by turning the room gain compensation on or off and adjusting the high pass frequency and the adjustment slope (12dB is the default setting).”

 

 

 

 

Advertisements
  1. Leave a comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: